BOLLSTAR 95
A LIQUID FORMULATION CONTAINING 9.5% LIQUID BORON/GAL.

The total amount of BOLLSTAR 95 over the growing season should not exceed the total recommended for your area (typically between 1 to 2 lbs. actual BORON per acre) and should be based on soil tests and/or plant analysis and yield goals along with previous experience, and growing season conditions.

DIRECTIONS FOR USE:
BOLLSTAR 95 is recommended for aerial, concentrate, and dilute application to various field, vegetable, tree, and nut crops. Rates and timing of applications are dependent on local conditions and should be made only in conjunction with the recommendation of the local authority. If at all possible, a soil and/or plant analysis should be obtained and the results used as a guide. BOLLSTAR 95 may be applied by ground or aerial equipment. Thorough coverage is necessary for best results and sufficient water should be used to assure uniform applications.

Guaranteed Analysis:
0-0-0
Boron (B).........................9.5%
Derived from Sodium Borate and Boric Acid

BORPAK
SOIL AND FOLIAR BORON PACKAGE

BORPAK is designed as a foliar spray for cotton, vegetables, trees, and other crops. BORPAK can also be applied to the soil where Boron levels in the soil are low. Organic complexes in BORPAK improve soil and foliar effectiveness. BORPAK contains vitamins, enzymes, amino acids, and gibberelic acid which are suspended in a high quality chealated 5% Boron solution.

These vitamins, enzymes, and amino acids include:

• Vitamin B Complex
• Biotin · Amulace
• Colene Anocital Acid
• Riboflavin
• Niacin
• Celluace
• Panothenic Acid
• Gibberelic Acid
• 5% Chealated Boron

An application of BORPAK will produce many significant benefits:

• Increased yields
• Better germination
• Substantial root development
• Increased plant food
• Improved nutrient availability in the soil/plant
• Larger fruit size
• Higher quality crop
• Improved plant vigor
• Increased profit

FOLIAR APPLICATION: Apply 4 to 8 ounces of BORPAK per acre.

SOIL APPLICATION: Apply 20 ounces of BORPAK per acre when knifed into soil.

Guaranteed Analysis:
Boron 5% ..................... 5.0%
Derived from Boric Acid

CALCIUM 8%

CALCIUM 8% is designed as a foliar nutritional spray to supply Calcium in a convenient soluble form. It is recommended for application to crops where Calcium sprays have proven effective.

COMPATIBILITY:
This product is compatible with most pesticides and fertilizers. A simple jar test for compatibility is recommended prior to any large scale mixing. In mixing, always add this product to the tank last. Applying area in combination will increase absorption. Do not use with phosphate fertilizers, lime, lime sulfur or other very basic products.

DIRECTIONS:
Mix contents before using. Drip and liquid fertilizer applications: Apply 1 to 3 gallons per acre in multiple treatments 1 to 2 weeks apart throughout the growing season. May be applied with nitrogen solutions.

FOLIAR APPLICATION:
Use 1 to 3 quarts per acre in multiple treatments. Apply when plants are young and growing vigorously, and not under stress. Apply at 10 to 14 day intervals. Use the lower rates on field and vegetable crops, and the higher dosages for vine and fruit crops. Use 25 to 40 gallons of water per acre by ground sprayers, or in 5 gallons of water per acre by air plane.

PRECAUTIONARY STATEMENTS:
CAUTION, KEEP OUT OF REACH OF CHILDREN

Avoid prolonged skin contact. Do not apply when weather conditions favor drift.

STORAGE AND DISPOSAL:
Do not contaminate water, food or feed by storage or disposal. Follow all governmental procedures for the disposal of pesticide spray solutions. Triple rinse container and empty rinse into spray tank. Dispose of empty container according to approved local practices: contact county agricultural commissioner for disposal information.

CONDITIONS OF SALE:
Follow directions carefully. Mixing and methods of application, weather and crop conditions, mixtures with other chemicals not specifically recommended, and other influencing factors in the use of this product are beyond the control of the seller. Buyer assumes all risks of use, storage and handling of this material not in strict accordance with directions given herewith.

NET CONTENTS:
__ 2.5 Gallons
__ 2 X 2.5 Gal.
__ 5 Gallons

CALCIUM CHLORIDE 12%

Guaranteed Analysis:
Calcium ............. 12%
Derived from Calcium Chloride Lignosulfonic Acid

Net Weight : 9.2 Lbs. per Gallon

Net Contents:
2.5 Gallon
2 X 2.5 Gallon

COPPER 5%

Guaranteed Analysis:
0-0-0 Copper (Cu)………..5%

NET CONTENTS:
____2.5 Gallon
___2 x 2.5 Gallon

NET WEIGHT: 10 lbs per Gallon

KEEP OUT OF REACH OF CHILDREN

SHAKE WELL BEFORE USING

IRON 5% LIGNIN

GENERAL RECOMMENDATION:
IRON 5% LIGNIN is designed for use in all liquid fertilizers (except aqua ammonia) and suspension as a soil application for all crops requiring iron. For best results follow soil test recommendations or plant analysis recommendations.

ROW OR BAND APPLICATION:
Apply 3 to 5 pounds (1-2 quarts) of IRON 5% LIGNIN per acre, just before or at planting.

BROADCAST APPLICATION:
Apply 5 to 10 pounds (2-3 quarts) of IRON 5% LIGNIN per acre just before planting and work into the top 3 to 5 inches of soil.

FOLIAR APPLICATION:
IRON 5% LIGNIN may be used at the rate of 2 to 4 pounds (1 ½ to 3 pints) per acre with a minimum of 20 gallons water.

OTHER CROPS AND USES:
Ornamentals, container-grown trees and shrubs, and field grown nursery stock:
Soil: Apply 1 to 4 ounces per 100 square feet. Repeat application at fertilization or regular intervals.
Foliage: Apply 1 quart per acre as a thorough cover spray. Greenhouse-grown chrysanthemums, roses, carnations, and potted floral plants
Soil Only: Apply 1 to 3 ounces per 100 square foot at regular intervals with fertilizer.

TURF GRASSES:
In early spring apply 1 to 2 quarts per acre or 1 to 2 fluid ounces per 1,000 square foot in sufficient water for thorough coverage. Mix well with water, liquid fertilizer solution or pesticide solution before application. Repeat as needed.

KEEP OUT OF REACH OF CHILDREN

SHAKE WEEL BEFORE USING

Guaranteed Analysis:
0-0-0
Sulfur (S)………………… 4.5%
Iron (Fe) …………….. 5.0%
CARRIER.......................89.5%
Derived from Ferrous sulfate
Chelating Agent: Lignin Sulfonate

NET WEIGHT: 10 lbs. per gallon
FREEZING TEMPERATURE: 25 degrees F
NET CONTENTS:
_____ 2.5 Gallons
_____ 2 X 2.5 Gallons

LIGNIN CALCIUM 5%

GENERAL INFORMATION:
Lignin Calcium 5% is designed for soil or foliar application and is nonphytoxic when used as directed. For soil application it may be used in all liquid fertilizers (except aqua ammonia.)

ROW OR BAND APPLICATION:
Apply 2-8 quarts Lignin Calcium per acre depending upon severity of calcium-deficiency and soil conditions. Optimum rate of application will vary between fields, depending on soil pH and organic matter content. For best results, follow soil tests and plant tissue recommendations.

NOTE: FOLIAR APPLICATION:
Fruit and Nut: 1-2 pints per 100 gallons of spray. Start two to three weeks after full bloom and continue at two-week intervals. Spray to thoroughly cover foliage.
Vegetables: 1 pint per acre per week in normal spray program.
Cotton: 1 pint per acre per week. Start after every bloom. Use a minimum of 20 gallons of water per acre.
Other Crops and Uses: Ornamentals, container-grown Trees and Shrubs, and fluid grown Nursery Stock
Soil: Apply 1 to 4 ounces per 100 sq. ft. Repeat application at fertilization or regular intervals.
Foliar: Apply 1 qt. per acre as a thorough cover spray.
Greenhouse: Grown Chrysanthemums, Roses, Carnations and Potted Flora Plants.
Soil Only: Apply 1 to 3 Ounces per 100 sq. ft. at regular intervals with fertilizer or drip irrigation.
Turf Grasses: In early spring apply 1 to 2 quarts per acre, or 1 to 2 fluid ounces per 1,000 sq. ft., in sufficient water for thorough coverage. Mix well with water, liquid fertilizer solution or pesticide solution before application. Repeat as needed. Since weather, crop, soil, and other conditions may very, the Seller makes no warranty of any kind, expressed or implied, concerning the use of this product. The user assumes all rights of use or handling weather or not in accordance with direction or suggestions.

KEEP OUT OF REACH OF CHILDREN:
In case of contact with eyes, flush with water. Contact physician if irritation persists. Dispose of container in accordance with local, state and federal regulations.

Guaranteed Analysis:
0-0-0
CALCIUM (Ca).......................5.0%
SULFUR (S)...................................1.2%
Derived from Calcium Nitrate
Chelating agent: Lignin Sulfonate

NET WEIGHT: 10 lbs. per gallon
NET CONTENTS:
_____ 2.5 Gallons
_____ 2 X 2.5 Gallons
_____ 5 Gallons

LIGNIN CALCIUM NITRATE 12%

Guaranteed Analysis:
0-0-0
Calcium (Ca) …..…… 12.0%
Sulfur ……………….. 1.2%

Derived From: Calcium Nitrate
Chelating Agent: Lignin Sulfonate

NET CONTENTS
_______2.5 Gallons
_______2 X 2.5 Gallons

NET WEIGHT: 10 lbs. per gallon

KEEP OUT OF REACH OF CHILDREN SHAKE WELL BEFORE USING

LIGNIN MAGNESIUM 4%

GENERAL RECOMMENDATIONS:
Lignin Magnesium 4% is designed for use in all liquid fertilizers (except aqua ammonia) and suspensions as a soil application for all crops requiring magnesium.

ROW OR BAND APPLICATION:
Apply 2-5 pounds (1-2 quarts) of Lignin Magnesium 4% per acre, just before or at planting time.

BROADCAST APPLICATION:
Apply 5-10 pounds (2-4 quarts) of Lignin Magnesium 4% per acre just before planting and work into the top 3-5 inches of soil.
NOTE: For foliar application, this product may be used at the rate of 2-4 pints per acre with a minimum of 20 gallons of water throughout the growing season. Optimum rate of application will vary between fields, depending on soil pH and organic matter content. For best results, follow soil test or plant analysis recommendations.

MIXING INSTRUCTIONS:
PESTICIDES: Follow this sequence
1. Water;
2. Chelate;
3. Pesticide Agitate to assure proper mixing. Always jar test with new combinations.
FERTILIZER: Follow this sequence
1. 1/3 of Fertilizer;
2. Chelate;
3. Balance of Fertilizer Agitate to assure proper mix. Since weather, crop, soil and other conditions may vary, the seller makes no warranty of any kind, expressed or implied, concerning the use of this product. The user assumes all risks of use or handling whether or not in accordance with directions or suggestions.

KEEP OUT OF REACH OF CHILDREN
In case of contact with eyes, flush with water. Contact physician if irritation persists. Dispose of container in accordance with local, state and federal regulations.

Guaranteed Analysis:
0-0-0
Sulfur (S)...................................6%
Magnesium (Mg).........................4%
Magnesium as MgO..........6.63%
Derived from Magnesium Sulfate
Chelating agent: Lignin Sulfonate

NET WEIGHT: 10.5 lbs. per gallon
NET CONTENTS:
_____ 2.5 Gallons
_____ 2 X 2.5 Gallons

MANGANESE 5% LIGNIN

APPLICATION RATES:

ROW AND BAND APPLICATION:
Apply 2 to 5 pounds (1-2 quarts) per acre just before planting and work into the top 3-5 inches of the soil.
FOLIAR APPLICATION:
Use 2 to 4 pints per acre with a minimum of 20 gallons of water throughout the growing season. For best results follow soil test or plant analysis recommendations.

KEEP OUT OF REACH OF CHILDREN
SHAKE WELL BEFORE USING

Guaranteed Analysis:
0-0-0
Sulfur …………… 4%
Manganese ……… 5%

NET WEIGHT: 10 lbs. per gallon
NET CONTENTS:
_____ 2.5 Gallons
_____ 2 X 2.5 Gallons

ZINC 10%

Guaranteed Analysis:
0-0-0
Sulfur (S)..................................5.0%
Zinc (Zn)..................................10.0%

GENERAL RECOMMENDATIONS:
ZINC 10% is designed for use in all liquid fertilizers (except aqua ammonial) and suspensions as a soil application.

ROW OR BAND APPLICATION:
Apply 3-5 pounds (1-2 Quarts) ZINC 10% per acre just before or at planting time.

BROADCAST APPLICATION:
Apply 5-10 pounds (2-4 Quarts) ZINC 10% per acre just before planting and work into top 3-5 inches of soil.

NOTE: For foliar application, this product may by used at the rate of 2-4 pounds (1-2 pints) per acre with a minimum of 20 gallons of water throughout the growing season. The addition of 0.5% N as urea of total solution may be added to aid leaf absorption. Optimum rate of application will vary between fields, depending on soil pH and organic matter content. For best results, follow soil test or plant analysis recommendations.